BM 17
Bevel angle continuously adjustable 0°–90°
Front milling for a clean, high-quality bevel
Overload protection of the motor
For plates and pipes (OD from 48.6 mm)
Light and handy – only 5.2 kg

Technical parameters
Max. bevel at 45°: | 10 mm thickness / 15 mm width |
|---|---|
Bevelling angle: | 0°–90°, no extra parts needed |
Depth adjustment: | one-touch, in 0.1 mm steps |
Plate thickness: | from 3 mm, no upper limit |
Pipe bevelling: | from Ø 48.6 mm (1 1/2") |
Motor power: | 1080 W |
Voltage: | 230 V / 50–60 Hz |
Inserts: | 3 pcs (CFWB110350 / CFWB110149) |
Materials: | carbon steel, stainless steel, non-ferrous metals |
Noise level: | 95–105 dB |
Net weight of the machine: | 5.2 kg |
Maximum bevel by angle
Angle | Thickness | Width |
|---|---|---|
0° | 22 mm | 7.5 mm |
15° | 22.5 mm | 23.5 mm |
30° | 15 mm | 17 mm |
45° | 10 mm | 15 mm |
75° | 2.8 mm | 11 mm |
90° | 7.5 mm | 11 mm |
BM 17
BM 17 is a light, powerful and easy-to-handle hand-held beveller for fast and accurate bevelling of plate edges, profiles and smaller metal parts. Thanks to milling it gives a clean surface, a precise angle and repeatable results – with no heat-affected zone.
It uses an optimised front milling method, which puts less load on the motor than standard peripheral bevellers. Bevelling is faster and easier and the bevel surface is clean and high-quality. The bevel angle is continuously adjustable from 0° to 90°, the milling depth is also continuously adjustable, and the overload protection prevents damage to the motor.
BM 17 is ideal for weld preparation, deburring and chamfering edges after flame, laser or plasma cutting – and it is much faster and cleaner than grinding.
Which machine to choose? BM 17 is the right choice when you want a light machine and any bevel angle from 0° to 90°. For wider bevels up to 21 mm go for MAXCLINE, and for holes and tight curves RADIMAX.
Scope of delivery
BM 17 is supplied complete in a carrying case with:
3 carbide inserts (universal)
Stop roller for guiding along pipes
Bow-type handle
Tools for changing inserts and setting up the machine
Optional Accessories
Spare carbide inserts – universal, for stainless steel or for aluminium
Magnetic chip collector
AlternativE products
RADIMAX
➜ Easy operation and low weight
➜ Equipped with electric speed control
➜ Can be used on pipes and cutouts
VEERIO
➜ Suitable for machining small parts
➜ Ability to process various materials
➜ Optional material feeding system available
SHEEZER
➜ Mobile and lightweight
➜ For flat or slightly curved plates
➜ Capability to bevel the bottom side of plates
Contact us with a request or question
Our Team of experts is here for you every working day.














